1. Automatic/manual feeding into the fixture → automatic stripping of the outer quilt → automatic brushing of the network cable → automatic reverse brushing and cutting of the network cable → sorting of the network cable → aluminum foil finishing → copper sheathing → CCD detection → copper sheathing → sorting network cables → automatic copper coating Foil→Laser cutting aluminum foil→Automatically pull out the aluminum foil→Automatically take the wire (double station model).

2. The machine only needs to put in one manual feeding cycloid and supplementary materials, and the quality is reliable.

3. Efficiency description: equipment operating cycle 4.0S-6.5S/PCS. The first product takes about 80S from the line feeding to the discharging.

4. The equipment utilization rate is greater than 95%, and the equipment yield rate is greater than 97%.

5. This equipment adopts modular design, and the module functions can be turned on and off at will according to the product process requirements. It is more convenient and faster to change the line.

6. Equipment parameters: Voltage: 220VAC 2KW Air pressure: 0.4-0.6MPa Dimensions: L5200*W1000*H1800